These items have
been Added
|
|
576a |
Jewelry - Earrings - 14K yellow gold, white gold
and diamond hoop style, French backs, set with six stones each of good size,
total weight 6.0 dwt (9.2 g) |
|
|
Jewelry - Earrings - 14K and half round
symmetrical Mabe pearl, diameter of setting 13mm, toal weight 4.0 dwt (6.2 g) |
|
|
|
576c |
Jewelry - Cameo - 18K and carved shell depicting
nude nymphs or sprites at play, 35mm x 47mm, total weight 6.0 dwt (9.2 g),
can be worn as pin or pendant |
|
|
576d |
Jewelry lot - Earrings and necklace - 18K white
gold, diamond and cultured pearl earrings with 14KWG posts (tested), the
backs very secure but white RGP, weight of earrings without backs 4.2 dwt
(6.6 g); ovoid cultured pearl necklace with 14K white gold beads and
fittings, 16-inch length |
|
|
576e |
Jewelry lot - Earrings and ring in 14K - Amethyst
and cabochon with French backs, stones 13mm x 18mm, design copyright for
"PBD" marked on back; double shank ring with black onyx cabochon,
size 7; total weight 8.0 dwt (12.4 g) |
|
|
676a |
WW - Rolex Oyster Perpetual Submariner ref 5513
made in the first quarter of 1970 (so marked within case-back), 39mm diameter
x 47mm to lug tips, stainless steel original case and later Oyster Submariner
bracelet with flip-lock deployment clasp and diving suit extension,
refinished black "Turn-O-Graph" dial (the original at this point
would have been the "660 ft = 200m Submariner" dial, 26J
("Twenty-Six Fine Rubies") cal 1520, s#30282221, triple signed with
signed clasp, bracelet ref 93150 (introduced in 1972 to follow the ref 9315
that this watch would have been born with), inside back ref 5513 |
|
|
712a |
WW - Omega Automatic, scarce square form, 27mm
wide x 34mm to lug tips, heavy 18K original case, Longines lizard strap with
Longines GF buckle, original silvered dial, 24J cal 571, s#17135272, case
marked "3999SC" and "1," triple signed; gross weight of
head with mvt & crystal 18.2 dwt (28.3 g) |
These items have been Deleted
|
|
117 |
Hamilton 21J grade 960, 16S, GF OF SB&B
recase, SW-LS, WE-DSD, fully capped lever escapement, GJS, narrow parallel
pattern NI damascene, s#68304, total production of this model 3000 |
|
|
157 |
Howard Keystone 21J series 10, 16S, GF OF original
SO case with Howard logo ring within back, SW-LS, WE-DSD, fully capped lever
escapement, GJS, plain parallel pattern NI damascene, s#1148884 |
|
|
202 |
Rockford Indicator marked grade 655 with winding
indicator, 16S, GF OF SB&B recase, SW-LS, older painted metal
reproduction dial, fully capped lever escapement, 21J, GJS, gold train, zebra
pin-stripe pattern NI damascene, s#861781 |
|
|
301 |
PW lot (2) American RR style 16S OF - Elgin 21J
Father Time, GF HB&B case with light wear & dents, near mint mvt,
GRO, good dial with dirt & residue; Illinois two-tone contract mvt &
DSD signed "S Tripp, Millerton, NY," 17J, GRO, clean mvt &
dial, exceptional "Scepter" SB&B case with locomotive on back,
near mint condition |
|
|
317 |
PW lot (2) Hamilton 16S OF - 19J grade 996, 16S,
nickel alloy original Hamilton display case, SW-LS, WE-DSD with single hl,
lever escapement, jeweled barrel, GJS, radiant rope-twist pattern NI
damascene center with pin-wheel surrounds, s#1272132, clean, GRO; perfect
Electric Railway Special marked Montgomery WED, grade 956, broken mainspring,
good staff, GF OF SB&B original case, brass edges only, s#1704465, clean
mvt |
|
|
603 |
Heavy 14-18K continuous neck chain measuring 41
inches, no clasp, 27.5 dwt (42.8 g) |
These items Should Read:
|
|
562 |
Brooch - 18K yellow gold, white gold and diamond,
"Christmas Jewel 1972" theme with deer and WG snowflakes set with
single stones, #223 of a limited edition of 500 by Peter Lindeman, total
weight 18.6 dwt (28.8 g), in original box with matching limited edition
numbers |
|
|
572 |
Studs and vest buttons set (3 small) (4 large) |
|
|
777 |
Condition:
a more severe dent to the band at about 2 o'clock; note that the wear
to the back has led to tiny separation of the back planchet (about 2mm long)
near the hinge; |
|
|
805 |
period
Masonic dial unfortunately is a replacement, having been glued to the dial
plate, the cut-off feet not corresponding to dial plate holes |