|
Mvt: Runs w/ tension applied to mainspring, but the winding & setting is gummed solid & barely moves; one can wind by screwing the set screw on the click wheel only; needs complete OH, removal of solidified grease; at least the train was properly lubed so one can see that the watch will run; clean plates show hardly any MFS, good slots & settings, no oxide on bright work; dial has many faint hls; hands good; original light gauge case shows hardly any wear, some MFS, several sharp dings in band and just touching the back cover edge in one case; bow & crown show very little wear; good glass crystal; has a very minty look to the case & mvt, could use a perfect dial which is common in this model, the edge dings are harder to work with in a thin gauge coin edge band; the grease used in the winding train is all that has frozen up
|